Table of Contents
Advertisement
5.3 Additional functions
There is a menu with additional functions available for selection after start. When pressing
pear on the display.
Select from the menu with the up- and down arrows and press
Note!
Some of the functions may not be available or active on your machine.
Pause
It is possible to pause an ongoing program.
Select PAUSE and activate.
For some machines it is also possible to pause directly when pressing
When pressing
again the program will continue.
End a program
It is possible to end a program after start.
Select END PROGRAM and activate.
When pressing
the program will be ended.
Status
Select STATUS MENU and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine.
User manual
to activate.
the menu will ap-
.
15
Advertisement
Table of Contents
