Advertisement
(2) Install of Dual Port 10GBASE-T Riser Card.
1. Meet the terminals of the Dual Port 10GBASE-T Riser Card and the LAN riser slot.
2. Insert it straightly to connector on MB with two screws.
(Below is figure of 1U.)
3. Install the LAN port cover it attached the Dual Port 10GBASE-T Riser Card.
Screw
1U Rack Server
Do not touch the terminals of the Dual Port 10GBASE-T Riser Card and MB with
●
your bare hand. Fingerprints and dust left on them cause the server to malfunction.
Be careful not to apply excess force to a Dual Port 10GBASE-T Riser Card or MB.
●
IMPORTANT
Doing so may damage the card.
855-910997-136-01-2
Screw
2U Rack Server
Advertisement
