Advertisement
Installing N8104-136 in Server
1．Preparation point to be checked
(1) Exit from the application programs and shutdown the system.
(2) Turn off the power of the server and disconnect all the power cords from the receptacles.
2．Extension procedure
(1) Attachment preparation of Dual Port 10GBASE-T Riser Card.
1. Remove the top cover according to the User's Guide of the server.
2. Lift straight up and remove the riser module assembly from the server.
3. Remove the blank cover on the rear of the server.
screw
1U Rack Server
3. Remove two screws on the MB.
855-910997-136-01-2
Screw
2U Rack Server
Screw
Advertisement
