Avaya 3500 Series Installing page 19

Figure 2: Rear view of stack connectors on ERS 3524GT/3524GT-PWR+
The following diagram illustrates the stack connectors for the ERS 3526T/3526T-PWR+
units.
Figure 3: Rear view of stack connectors on ERS 3526T/3526T-PWR+
Related topics:
Base Unit select switch
Cascade Down port
Cascade Up port
Base Unit select switch
Use the Base Unit Select switch to designate a switch in the stack as the base unit. Slide the
Base Unit Select switch to the right to designate a switch as the base unit. You can designate
only one switch in a stack as the base unit; that is, with the switch in the base unit position.
on page 19
on page 20
on page 20
Avaya Ethernet Routing Switch 3500 series stacking
February 2013 19