Power Module - Fujitsu MB2146-450-E Setup Manual

3.4.2 Power Module

EV-board provides 2 kinds of power supplies for user to choose. Please read the following
instructions before using.
DC Adaptor: 5V DC:
Output voltage: 3.3V
Connection: Connector (J12)
Battery:
QTY: 4PCS;
Model: AA;
Nominal voltage: 1.5V.
Connection: Socket for Battery
If any of the power supplies is connected to the EV-board correctly, power LED (D5) on the
EV-board will be on. Refer to Figure 3-3.
The following two power supplies are recommended. Please follow the settings below.
Power supply
4 AA batteries from
BT1 on the back of
the EV-board.
EV BOARD MB2146-450-E V1.3
Chapter 3 EV-board Manual
Figure 3-3: Power Module
Table 3-2: Selection of Power Supply
Header name
U5: BAT.
MCU-AN-500072-E-13 – Page 16
Settings
5V
U5