Function List - Fujitsu MB2146-450-E Setup Manual

3.2 Function List

The EV-board is consisted of a board and a sample firmware. The board, together with a
BGMA (PN: MB2146-08-E) and a SOFTUNE, provides a useful platform for using the MCU
and its peripherals. It features in the following functions.
Support LCD, can display five letters and six numbers
Support I2C, can write/read data to/from EEPROM
Support UART, can send and receive data asynchronously
Support temperature detection, can detect temperature from -40℃ to 85℃
Support low power control, can set standby time
Support mode switch, mode switch "EEPROM -> temperature -> UART -> RTC ->
EEPROM...."
Support wake-up from standby mode
Support beep, when a key is pressed, the beep makes a short sound
EV BOARD MB2146-450-E V1.3
Chapter 3 EV-board Manual
MCU-AN-500072-E-13 – Page 13