Feature; Hardware Setup - Fujitsu MB2146-450-E Setup Manual

1.4 Feature

The MB95F310 Series EV-Board is the best for a performance and functional evaluation,
and operation check before using MB95F310 Series MCU in a user's system.
The features of the BGM debugger for MB95F310 Series MCU are shown as below.
Microcomputer operation voltage ranging from +1.8V to +3.3V.
Compact development environment, a light and small BGM Adapter.
Since a monitor program is performed in a separate memory space, it does not
consume any user memory space.
Continuous execution, step execution and break correspondence.
It connects with a host computer by the USB interface.

1.5 Hardware Setup

In the hardware setup procedure, you should configure and connect the hardware products.
This chapter introduces the configuring and connecting procedure for each product. Check
the contents and complete the hardware setup.
Configuration of each product
- Configuring EV-Board
Connection of each product
- Connecting BGMA and EV-board
- Connecting EV-Board power supply
EV BOARD MB2146-450-E V1.3
Chapter 1 Product Overview
MCU-AN-500072-E-13 – Page 6