Reverse Engineering And Conversion Technologies; Firmware And Hardware; Transfer To A Third Party; Renting Out, Leasing Out And Sub-Licensing - Panasonic ISE SMART CONNECT KNX Product Manual

14.4.2 Reverse engineering and conversion technologies

The licensee is not authorised to apply reverse-engineering techniques to the ISE SMART CONNECT
KNX Panasonic software or to convert the ISE SMART CONNECT KNX Panasonic software into another
type. Such techniques include, in particular, disassembly (conversion of the binary-coded computer in-
structions of an executable program into an assembler language which can be read by humans) or de-
compilation (conversion of binary-coded computer instructions or assembler instructions into source
code in the form of high-level language instructions).

14.4.3 Firmware and hardware

The firmware may only be installed and used on the hardware (ISE SMART CONNECT KNX Panasonic)
approved by the licensor.

14.4.4 Transfer to a third party

The ISE SMART CONNECT KNX Panasonic software must not be passed on or made accessible to third
parties.

14.4.5 Renting out, leasing out and sub-licensing

The licensee is not authorised to rent or lease the ISE SMART CONNECT KNX Panasonic software or
grant sub-licenses to the program.

14.4.6 Software creation

The licensee requires written approval from the licensor to create and distribute software which is de-
rived from the ISE SMART CONNECT KNX Panasonic software.

14.4.7 The mechanisms of license management and copy protection

The mechanisms of the license management and copying protection of the ISE SMART CONNECT KNX
Panasonic software must not be analysed, published, circumvented or disabled.
14.5

Property and confidentiality

14.5.1 Documentation

The ISE SMART CONNECT KNX Panasonic software and its documentation (which shall be provided in
printed format or also as online help or online documentation) are business secrets of the licensor and/
or the object of copyright and/or other rights and shall continue to belong to the licensor. The licensee
shall observe these rights.
14.5.2 Transfer to a third party
Neither the software, the data backup copy nor the documentation (which shall be provided in printed
format or also as online help or online documentation) may be passed on to third parties at any point in
time, in whole or in part, for a fee or free of charge.
14.6

Modifications and subsequent deliveries

The ISE SMART CONNECT KNX Panasonic software and the documentation (which shall be provided in
printed format or additionally as online help or online documentation) shall be subject to possible chang-
es by the licensor. You will find the latest software and documentation versions at www.ise.de.
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Licence Agreement ISE SMART CONNECT KNX Panasonic
1-000C-000
S. 66 / 69