Mounting The Device - Panasonic ISE SMART CONNECT KNX Product Manual

6.3

Mounting the device

ISE SMART CONNECT KNX Panasonic may only be assembled and installed by qualified electricians.
Specialist knowledge of the installation regulations is a prerequisite.
Warning
Danger from incorrect use
Incorrect use can result in damage to the device, fire or other dangers.
• Only qualified electricians may install and mount electrical devices.
• Follow the instructions in this product manual.
• This product manual is part of the product and must remain with the customer.
Warning
Danger of electric shock
An electric shock can result from touching live parts in the installation environment.
Electric shock can cause death.
Pay attention to the installation regulations:
• Route the bus line with the sheathing intact until it is close to the bus connection terminal.
• Firmly press the bus line into the bus connection terminal as far as possible.
• Install bus line leads without sheathing (SELV) reliably disconnected from all non-safety low-
voltage cables (SELV/PELV).
• Maintain the specified clearance.
• Attach the cover cap supplied.
• For more information, see also the VDE regulations governing SELV (DIN VDE 0100-410/
"Safe separation", KNX installation regulation).
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Installation
1-000C-000
S. 17 / 69