Ip Settings - Panasonic ISE SMART CONNECT KNX Product Manual

Updating a product in the existing project
Requirement: New product database entry exists in the catalogue.
1. In the ETS, open the project for which the device is to be updated.
2. Search for the new product database entry in the catalogue and add the new version of the device
to the devices in your project.
3. Select the old version of the device in your topology.
4. Under <<Properties>>, select the <<Information>>
5. Select the <<Update>> button under the item <<Update application program version>> (see figure
17, item. 2)
If you change the value under <<Change application program>> (see figure 17, item.
1), user-defined settings such as links to group addresses will be lost.
6. Select the newly added device and delete it again from your topology.
Figure 17: Updating the application program

8.2.2 IP settings

Besides the physical address in the KNX network, an IP address, the subnet mask and the address of the
standard gateway in the IP data network must be assigned to ISE SMART CONNECT KNX Panasonic.
You can enter the settings manually in the ETS or receive them automatically (obtain the data from a
DHCP server, e.g. integrated in the router of the data network).
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Commissioning and configuration
→ <<Application program>> tab.
1-000C-000
S. 30 / 69