Leds In Operation - Panasonic ISE SMART CONNECT KNX Product Manual

8.1.2 LEDs in operation

LED status after successful device start-up:
(green)
(off)
Table 8: "APP" LED in operation
(yellow)
. . . . .
(off).(yellow).(off).(yellow).(off).(yellow).
Rapid flashing
Error
(off)
Table 9: "COM" LED in operation
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
APP
COM
Commissioning and configuration
Description
The device is working perfectly (normal opera-
tion).
The device is currently starting up or is out of
operation.
• Wait until the device start-up process is
complete.
• If the device is still out of operation, check
the connections and the power supply.
Description
The KNX connection has been established.
No KNX telegram traffic.
The LED is also deemed to be continuously on
if brief irregular interruptions occur.
KNX connection has been established.
KNX telegram traffic.
Connection to KNX is interrupted.
• Check whether the KNX and voltage connec-
tions are mixed up.
• Check the bus connection.
• Check whether the power supply is correctly
connected.
1-000C-000
S. 27 / 69