Table of Contents
Advertisement
11
Troubleshooting
Error codes are displayed on the device website under <<Device status>>.
If the error display has the value <<Inactive>>, no errors have occurred.
The device website is not always updated automatically.
Use your browser's function to perform an update.
LEDs on the device provide you with further information:
►
LEDs during device start-up, p. 25.
►
LEDs in operation, p. 27.
The following table shows solutions for displayed error codes and possible configuration errors.
Problem
Camera image does not open
URL is not opened
Table 36: Image transmission
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Troubleshooting
Cause: The transferred URL does not exist.
Solution: Check the defined URL in the parameter <<Camera
links>>.
Cause: A link with the configured number does not exist
(only numbers 0-9 are valid).
Solution:
• Check the available numbers (ETS tab <<Camera
links>>).
• Enter the number of the desired link as the value of the
communication object 32 | 132 | 232 | 332.
►
See Select source, p. 47.
Troubleshooting
1-000C-000
S. 55 / 69
Advertisement
Table of Contents
