Disassembly And Disposal - Panasonic ISE SMART CONNECT KNX Product Manual

12

Disassembly and Disposal

If you want to disassemble the device, for example due to a defect, proceed in reverse order to assembly.
Removing the cover cap
Warning
Danger from incorrect use
Incorrect use can result in damage to the device, fire or other dangers.
• Only qualified electricians may install and disassemble electrical devices.
• Follow the instructions in this product manual.
Warning
Danger of electric shock
An electric shock can result from touching live parts in the installation environment.
Electric shock can cause death.
• Enable the device.
• Cover up live parts in the vicinity.
1. Gently press in the cover cap at the side (see figure 25, item 1).
2. Pull off the cover cap upwards (see figure 25, item 2).
Figure 25: Removing the cover cap
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Disassembly and Disposal
1-000C-000
S. 61 / 69