Table of Contents
Advertisement
Section 5: Remote Control
5-1. Remote Control Functions
Aim the remote control toward the projection screen or at the sensor. Press desired remote button to send a signal to
the projector.
*Video: Switch displayed image to
video input. In Video mode , toggles
between: Video1 / Video2 / SVHS
*PC: Switch to PC mode. In PC mode,
toggles between RGB1 & RGB2.
*Enter: Mouse emulation ON, left mouse
button. Mouse emulation OFF, Enter
button for confirmation of a selection.
Drag: Lock left mouse button.
Text: Not used.
Blank: Replace projected image with
white background. Press again to return
image.
Optimize: Adjust brightness and
contrast for best picture.
Reveal: Press Reveal to cover the image on
the screen with a gray mask. Use the Disc
Pad to reveal the image. Press Reveal again
to return full screen projection of image.
*Volume: Increase (+) or decrease (–)
speaker volume.
Mouse: Toggle mouse emulation On/Off.
On: The L & R buttons operate
left & right mouse key functions. Drag-and-drop
functions are possible by pressing the Drag
button.
Disc Pad moves Mouse pointer.
Off: L button is the Enter confirmation button. R
button is for menu window. Disc Pad centers
image.
positioning. Disc Pad centers image.
Mode 1,2,3,4: Toggle between remote control
addresses 1, 2, 3, 4. (See Appendix ?)
Info: Display information window.
An icon will display to indicate a presentation
tool is active.
Pointer Freeze
image
3M IPC 2000
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
*Zoom: Increase (+) or decrease
(-) size of displayed image.
L
Pointer: Place a pointing device on the
screen. Use Disc Pad to move pointer.
Mouse
Mute
Magnify
Reveal
image
image
3M
Multimedia Projector MP8760
*Standby: Switch the projector
between Standby mode (lamp off,
fan off) and operation mode (lamp
on fan on)
*Focus: Adjust focus (+/-) of
displayed image.
ZOOM
FOCUS
Aux: Toggle On/Off a 3M compatible
device.
*Menu: Display system menus.
VIDEO
AUX
PC
MENU
Disc Pad (mouse pointer): Move
(point) the cursor on the projected
ENTER
image. Navigate menus. See Pointer.
Menu window position:
In mouse emulation mode:
R
Not in mouse emulation mode:
1
2
3
–
+
DRAG
4
5
6
OPTIMIZE
TEXT
WINDOW
7
8
9
Window: Toggle between full
REVEAL
BLANK
TIMER
screen and centered display mode
0
(Non-XGA modes only!!!)
CH–
CH+
Timer: Displays timer (window in lower
part of screen). Repeated operation of
key toggles on/off.
VOL
BRIGHT
*Mute: Toggle On/Off the audio sound.
FREEZE
MOUSE
*Bright: Increase (+) or decrease (-)
POINTER
MAGNIFY
brightness of displayed image.
MODE
1-2-3-4
INFO
Freeze: Stores (freezes) the projected
image. Press again to return the
projection of the current image.
Magnify: Press to enable magnification
mode. Press +/- buttons to
EPS
A
increase/decrease the magnification factor.
Move Disc Pad to displace the magnified
area within the image. Press Magnify again
to toggle back to normal presentation.
In video mode (NTSC only), press Magnify
to toggle between scaled and unscaled
representation.
! Note
The buttons marked with an asterisk (*) also appear on
the operator touch panel keypad.
right mouse Button (R).
keep button pressed while moving
menu window with Disc Pad around
13
Advertisement
Table of Contents
