Remote Control Functions - 3M SCP725W Operator's Manual

Remote Control Functions

Use a USB cable to connect from the PC to the SCP725W or SCP I/O Module (if equipped) and aim the remote
control toward the projection screen or at the IR sensor on the projector. Press desired remote control button to
send a signal to the projector.
Note: This projector is compatible with two remote control transmitters.
ON/
ST ANDBY
MENU
ZOOM
FREEZE BLANK
Downloaded From projector-manual.com 3M Manuals
ON/STANDBY
INPUT/
SOURCE
MUTE
INPUT/ SOURCE
Volume +
Volume –
Mute
VOL
Menu
L-Click
(top remote only)
R-Click
Up Arrow
TIMER
Down Arrow
Left Arrow
Right Arrow
Mouse Pad
Blank
Freeze
Timer
Zoom +
Zoom -
Trigger Button
(bottom remote only)
Trigger button on
backside of remote
ON: Press to turn projector ON.
OFF: Press to display confirmation message, press again to
switch projector to Standby mode.
Note: The confirmation message displays to ensure unit
does not get turned off accidentally.
Press for current input source. Press again to select different
computer/video input.
Computer 1/Component 1 –> Computer 2/Component 2 –>
RCA Composite Video –> S-Video –> HDMI]
Press to increase speaker volume.
Press to decrease speaker volume.
Press to switch the audio sound ON or OFF.
Press to display the Main Menu. When a menu is open, press
to exit menu.
Performs remote Left Mouse click function (when USB is
connected to projector USB)
Performs remote Right Mouse click function (when USB is
connected to projector USB).
Moves cursor upward through menu items.
Moves cursor downward through menu items.
Moves cursor left through menu items. Moves .ppt slides
backwards.
Moves cursor to right through menu items. Moves .ppt slides
forward.
Allows remote mouse functions. Allows Pan function when
in Zoom mode.
Press to replace projected image with black image. Press
again to return projection image.
Press to temporarily freeze movement on current image in
motion. Press again to return to active image.
Note: This function is intended for a few minutes only.
Press to initiate a 10:00 minute digital timer. Press up/down
arrows to change timer clock by 1 minute intervals up to
99:00.
Press and hold to increase the size of the displayed image up
to 200 percent.
Press and hold to decrease size of the displayed image down
to 100 percent
Pull trigger for remote LEFT mouse button functions. In
menu mode, use for remote Enter / Select functions.