5-3. Battery Replacement
The remote control uses two AAA batteries. The battery cover is located on the back of the remote control.
1.
Press the locking tab
2.
Lift up on the door
3.
Remove old batteries.
4.
Install new batteries
5.
Replace battery compartment door.
16
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
(1)
to release door. Figure 5-1.
(2)
to remove it and set it to the side.
(3)
. Make sure the polarity (+/-) on each battery matches the decal.
Figure 5-1. Replacing Batteries
™
3M
Multimedia Projector MP8760
© 3M IPC 2000