Extension (Mebx) Screen - DFI HU171 User Manual

4. In the Save & Exit menu, select Save Changes and Reset then select OK.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore as User Defaults
Boot Override
P1: ST160LT007-9ZV14D
UEFI: TOSHIBA TransMemory 1.00
Launch EFI Shell from fi lesystem device
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Chapter 7 Intel AMT Settings
Chapter 7
Save & Exit
Exit system setup after
saving the changes

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable Intel AMT in the Intel
®
Engine BIOS Extension (MEBX) Screen
1. When the system reboots, the following message will be displayed. Press <Ctrl-P> as
soon as the message is displayed; as this message will be displayed for only a few sec-
onds.
American
Megatrends
Version 2. 15. 1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Date: 12/17/2013 21:22:35 Ver: 1AQQW025
Press <Ctrl+P> to enter MEBX setup menu
Press <Ctrl+Alt+F1> Remote Assistance
Press <Del> to enter setup
2. You will be prompted for a password. The default password is "admin". Enter the default
password in the space provided under Intel(R) ME Password then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808
Copyright(C) 2003-13 Intel Corporation. All Rights Reserved.
MAIN MENU
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Confi guration
MEBx Exit
Intel(R) ME Password
[] = Move Highlight [Enter] = Select Entry
77
Management
®
[Esc]= Exit
www.dfi .com