Table of Contents
Advertisement
11.3
OTHER TYPES OF MASS RECEIVERS
-
If the car stays within the loop area, the barrier remains opened.
-
When the car leaves the loop area, the barrier goes to closing position.
The following illustration shows how to connect a loop detector with N.O. contact
If the loop detector has a N.C. contact, wire it to INFRD, as photocells connection does wire.
In this case, it is also possible to connect photocells and loop detector in series.
11.4
START COMMANDS
It is possible to wire an IC reader, just connect it to terminals OPN and GND.
12. RADIO PROGRAMMING
12.1
Transmitter storage
1) Press "LEARN" (S5 version 230/115V - S4 version 24V)and release just when the LED lights up.
2) Press the key on the transmitter until the LED turns OFF.
3) The transmitter has been duly stored.
It is possible to store additional transmitters following the same procedure.
The radio can store up to 32 different users. Each user can clone unlimited copies.
12.2
Deleting all transmitters
Press "LEARN" (S5 version 230/115V - S4 version 24V)and release just when the LED turns OFF:
now all transmitters have been deleted.
11
TERMINAL J5/JP5
TERMINAL J5/JP5
Power, 8W max
12Vdc (version 230V)
24Vdc (version 24V)
LOOP DETECTOR
CONTACT N.O.
Pulsante apri/chiudi (N.A.)
Pulsante chiusura (N.A.)
Pulsante apertura (N.A.)
Pulsante stop (N.C.)
Advertisement
Table of Contents
