Plasmamade User Guide Formula; Maintenance - PlasmaMade Airfilter GUC 1314 Installation And User Manual

PlasmaMade user Guide Formula

In order to allow the entire room to be purified, it is important to ventilate long enough.
You can calculate how long this is using the PlasmaMade User Guide Formula.
PlasmaMade user Guide Formula
Before: Always ventilate first for 10 minutes on a 200 m3 setting
(usually position 1 or 2).
During: Always ventilate well during the cooking process.
After*: The duration depends on the volume of the room (width x length x height =
volume). For every 50 m3 you should allow 10 minutes' post-ventilation on
the 200 m3 setting,
* with a minimum of 10 minutes and a maximum of 40 minutes.
Note: When using griddles and fryers, double the post-ventilation time.
Ventilation remains essential for every form of recirculation.
Use the filter up to two hours per 24 hours. The filter automatically turns off
after one hour. If you want to use the filter for a longer period, please
turn it back on.

6. Maintenance

Assuming that the PlasmaMade Airfilter has been installed according to the instructions,
it requires little maintenance. The PlasmaMade Airfilter is cleaned automatically as soon
as it is put into operation.
If the outside or the sensor becomes dirty with for example dust deposits, these may be
cleaned off simply using a vacuum cleaner.
There are no components that need to be replaced periodically.
You must follow the maintenance instructions of your extractor hood.
The grease filters must be of a good quality, always cleaned regularly and in order to
prevent contamination of the PlasmaMade filter.
22