Plasmamade User Guide Formula; Maintenance - PlasmaMade GUC 1314 Airfilter Installation And User Manual

Air filter
Hide thumbs Also See for GUC 1314 Airfilter:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
PlasmaMade user Guide Formula®
In order to allow the entire room to be purified, it is important to ventilate long
enough. You can calculate how long this is using the PlasmaMade User Guide
Formula®.
PlasmaMade
user Guide Formula
Before:
Always ventilate first for 10 minutes on a 200 m
(usually position 1 or 2).
During:
Always ventilate well during the cooking process.
After*:
The duration depends on the volume of the room (width x length x
height = volume). For every 50 m
post-ventilation on the 200 m
* with a minimum of 10 minutes.
Note:
When using griddles and fryers, double the post-ventilation time.
Ventilation remains essential for every form of recirculation.

6. Maintenance

Assuming that the PlasmaMade® Airfilter has been installed according to the
instructions, it requires little maintenance. The PlasmaMade® Airfilter is cleaned
automatically as soon as it is put into operation.
If the outside or the sensor becomes dirty with for example dust deposits, these may
be cleaned off simply using a vacuum cleaner.
There are no components that need to be replaced periodically.
You must follow the maintenance instructions of your extractor hood.
®
3
you should allow 15 minutes'
3
setting,
3
setting
22

Advertisement

Table of Contents
loading

Table of Contents