PlasmaMade Airfilter GUC 1314 Installation And User Manual page 28

Wall mounting
1. Using a spirit level, draw a straight line op the spot where you would like to fix
the bracket. Drill the first hole (also take into account the maximum
size specified in the blueprint). Drill a second hole 90 mm above or next to the
initial hole (use the mounting bracket if necessary to determine the location of
the second hole).
2. Fold both sides of the mounting bracket and secure it to the wall by means of
the supplied screws (4.2x25 mm) and screw anchors.
Slide the PlasmaMade Airfilter onto the mounting bracket.
3.
4. Install ductwork between the engine case and the PlasmaMade Airfilter.
27