1. Assemble positive and negative connectors.
Positive metal
contact
Negative
metal contact
Ensure that the
locking nut is
secured.
2. Insert the positive and negative connectors into DC input terminals.
The solar inverter supports Y-branch connectors. It is recommended that the number of PV
modules connected to the same connector be equal on each branch.
Ensure that the cable
cannot be pulled out after
being crimped.
Click
Pull back the DC input power
cable to ensure that it is in
position.
Ensure that the cable polarities
are correct.
6
Positive connector
Click
Negative
connector
Pull back the DC input
power cable to ensure that
it is in position.