Timer Recording (Video Plus+ ® System) - Philips DVDR3305 User Manual

Recording
Timer recording (VIDEO
Plus+ System)
®
This is a simple programming system for
DVD recorders. To use it, enter the
VIDEO Plus+ programming number
®
associated with your television
programme. You can find this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
Turn on the TV power. Select the
A
correct Video In channel at the TV.
Press TIMER on the remote control.
B
The timer schedule list appears.

Timer Schedule
Source RecMode Date
1
2
3
4
5
6
Press OK to confirm.
C
Or, press  key to go to the next
available empty slot and press OK.
The VIDEO Plus+

appears.
VIDEO Plus+ System
Enter the VIDEO Plus+ programming
number for the show you wish to
record. Press [RETURN] to return
to timer schedule or [TIMER] to
exit timer.
5
Confirm
Use the numeric keypad 0-9 to enter
D
the VIDEO Plus+
for the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in '53124').
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalise the DVD+R before it can be played on other players, see page 36.
32
16861_dvdr3305_05_eng5.indd 32
(continued)
Start End VPS
System menu
®
Cancel
OK
programming number
®
 To clear the VIDEO Plus+
number, press CLEAR on the remote
control.
 To cancel the VIDEO Plus+
programming, use  keys to select
in the menu and press OK.
CANCEL
To confirm your entry, select
E
the menu and press OK.
The system will store the timer entry

and return to the timer editor menu.
If the channel number of the TV channel

has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the VIDEO Plus+
Follow the instructions on the TV.
Press TIMER to exit the menu.
F
Insert a DVD+R/+RW into the DVD
G
recorder.
Press STANDBY-ON to turn off the
H
DVD recorder.
If the DVD recorder is not in standby

mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,

the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ' ' icon will light up on the

TIMER
display panel if a timer recording is set.
programming
®
®
in
CONFIRM
code.
®
2005-06-29 4:09:55 PM