Optional Connections; Connecting To A Cable Box Or Satellite Receiver - Philips DVDR3305/05B User Manual

Antenna/ cable
TV signals
Connecting to a Cable Box or
Satellite Receiver
Option 1
If your Cable Box/ Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
refer to "Connecting the antenna cables"
on page 12 for the complete connection
to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
1_dvdr3305_05_eng_16862.indd 15 1_dvdr3305_05_eng_16862.indd 15
IN
RF
A
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN

Optional Connections

OUT
TO TV
VIDEO AUDIO
S-VIDEO
R L
C
B
Option 2
If your Cable Box/ Satellite Receiver
has a scart output socket
A
Keep the existing antenna connection
from the Cable Box/ Satellite Receiver to
your TV.
B
Use the scart cable to connect the EXT1
TO TV-I/O socket on the DVD
recorder to the corresponding SCART
input socket on the TV.
C
Use another scart cable to connect the
EXT2 AUX-I/O socket on the DVD
recorder to the scart output socket
(possibly labelled as TV OUT or TO TV)
on the Cable Box/ Satellite Receiver.
To start playback, select the TV channel
directly on the Cable Box/ Satellite
Receiver. The DVD recorder will
automatically send the video/ audio
signals from the EXT2 AUX-I/O socket
to EXT1 (TO TV-I/O socket. You will
then see the picture from the additional
device on your TV, even if the DVD
recorder is turned off.
Back of a Cable Box
or Satellite Receiver
(Example only)
15
2005-10-31 5:00:02 PM 2005-10-31 5:00:02 PM