Satellite Recording - Philips HDR3700/05 User Manual

E2N41BN_EN.book Page 37 Wednesday, July 2, 2008 4:36 PM
When overwriting in the middle of the title:
overwrite
recording : A
existing title : B
30 - 180 seconds will be cut off.
after overwriting
Overwritten section and the rest of the sections will have
* 1
the same title name as the original existing title (B).
Note
• When a title is overwritten, it will split up the title into
the existing title and the new overwrite title. NO
chapter mark will be inserted.
• "Auto Chapter" interval time is reset at the
overwriting start point.
• A chapter mark is put at the beginning of the
overwrite title when overwriting in the middle of the
title.
title name :B* 1 title name : B

Satellite Recording

HDD HDD
You can set the unit to start recording whenever it
detects the video scart control from the Cable Box/
Satellite Receiver.
Preparing for the Satellite Recording:
[Preparation of the Cable Box/Satellite
Receiver]
• The Cable Box/Satellite Receiver should be
equipped with some kind of timer function.
program a timer on the Cable Box/Satellite
Receiver Box. (Refer to the tuner's manual on
how to set the timer.)
• Make sure to turn off the Cable Box/Satellite
Receiver when you finish setting.
[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
Cable Box/Satellite Receiver
(not supplied)
Scart cable (not supplied)
1
In stop mode, press [HDD] then
select the recording mode for HDD
using [REC MODE].
2
Press [SAT.REC].
• "Sat" will appear on the front panel display and
the unit goes into the Satellite Recording
standby mode.
3
When the Cable Box/Satellite
Receiver wakes up due to timer,
Satellite recording will start on the
unit.
4
When the Cable Box/Satellite
Receiver goes back to standby after
timer, Satellite recording stops and
unit returns to standby.
To cancel the Satellite Recording function in the
Satellite Recording standby mode:
Press [Q (STANDBY-ON)] or [SAT.REC] to turn on
the unit.
37
EN