Timer Recording - Philips HDR3700/05 User Manual

E2N41BN_EN.book Page 30 Wednesday, July 2, 2008 4:36 PM
The Time Shift Buffer will be stopped, cleared
in following cases:
- Turning off the power
- Start recording
- Editing titles or goes into editing menu
- Start dubbing
- Digital Video input (AV4)
- Using any functions in "Disc Editing" or "HDD
Settings"
- Selecting items in "Channel" setting:
"Digital&Analog Tuning"
"Digital Channel Setup"
"Digital Channel Setup"
"Digital Channel Setup"
"Digital Channel Setup"
"Analog Channel Setup"
"Analog Channel Setup"
"Analog Channel Setup"
• The Time Shift Buffer will automatically resume
for new recording
Note
• In Time Shift Buffer, when you display the digital
programme information, the on-screen display will
be recorded as the part of the picture.
• When you record the contents of the Time Shift
Buffer, the recording mode is always SP.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of Time Shift Buffer.
• After recording from Time shift buffer, portion that is
copy protected will not be seen on playback and
"Content is Copy Protected." message is indicated.
• Using [LIVE TV] makes it possible to go back to the
current position of the TV programme broadcast.
• When you press [PROGRAM + / –] to change the
channel to digital Video channel, the message :
"This action will clear the Time Shift Buffer. Do you
want to continue?" will appear. Selecting "Yes", the
Buffer is cleared and the channel will be changed.
• When you press [HOME], [TITLE] or [DISC MENU],
the message : "Time Shift Buffer will be cleared
depending on your selection. Do you want to
continue?" may appear.
• In HDD mode, you can pause the program when
you press [F (PAUSE)] during the program live on
the air. Furthermore, you can resume it by pressing
[B (PLAY)] in pause mode.
• Once it has exceeded 6 hours, the beginning of
Time Shift Buffer will be deleted accordingly, and
the elapsed time displayed will be unchanged.
30
EN

Timer Recording

D D VD-R DVD-R
You can set the unit to record up to 36 programmes,
up to a month in advance. Daily or weekly programme
recordings are also available.
• Be sure to set the clock before entering a timer
programming.
"Edit Channels"
Insert a recordable disc.
"Auto Tuning"
1
"Manual Tuning"
"Signal Information"
"Auto Tuning"
2
"Manual Tuning"
"Sort Channels"
3
4
HDD HDD DVD+RW D D VD+R VD+RW W DVD+R D D VD+R VD+R
VD-R
In stop mode, press [TIMER].
"Timer Programming" list will appear.
Select "New Programme" using
[U \ D], then press [OK].
Timer Programming
Date Start End CH
01/01 12:00 13:00 1
01/01 12:00 13:00 1
New Programme
12:00
Press TIMER to exit
• If there are 7 programmes or more, use
[S (PREV)],/[T (NEXT)]to turn the page.
Enter the date using [U \ D], then
press [P].
Each time you press [D] at the current date, the
timer recording date will change as follows.
e.g., 1st January
01/01
Daily
M-F (Mon.-Fri.)
W-SAT
W-FRI
W-SUN
31/01
Timer Programming
Date Start End CH
01/01 12:00 13:00 1
Skip Date Start
01/01 --:--
OFF
CH REC To Mode
--- 1 SLP
DVD
SLP
12:00
Set date
Enter the time to start and to end
using [U \ D], then press [P].
DVD-RW D D VD- VD-R R W W
STTL
TUE 01/01
STTL
End
--:--
STTL
OFF
1h00m
TUE 01/01