Settings For External Equipment - Philips HDR3700/05 User Manual

E2N41BN_EN.book Page 38 Wednesday, July 2, 2008 4:36 PM
To cancel the Satellite Recording function while
the Satellite Recording is in progress:
Press [STOP C] on the front panel of the unit, or
press [C (STOP)] on the remote control.
Note
• If the satellite recording starts when the power is on,
the TV will switch over to the channel being
recorded.
• If you want to use the unit during the satellite
recording which starts in standby, press
[Q (STANDBY-ON)] to switch the input on your TV
to the recorder source.
• Recording picture will be distorted if the copy
protection signal is being detected during Satellite
Timer Recording.
• [SAT.REC] does not work under the following
circumstances:
- "HOME" menus are displayed.
- "Timer Programming" menu is displayed.
- Title list or any file list is displayed.
• When a regular Timer Recording and the Satellite
Timer Recording are overlapped, the examples are
given below.
Example 1
Timer
Recording
Satellite
Recording
Actual
Recording
Example 2
Timer
Recording
Satellite
Recording
Actual
Recording
Example 3
Timer
Recording
Satellite
Recording
Actual
Recording
38
EN

Settings for External Equipment

Video Standard
When you record from external equipment, you can
set the format Auto, PAL or SECAM.
1
In stop mode, press [HOME]. Select
"General Settings" using [U \ D],
then press [OK].
2
Select "Recording" using [U \ D],
then press [OK].
3
Select "Video Standard" using
[U \ D], then press [OK].
4
Select "Auto", "PAL" or "SECAM"
using [U \ D], then press [OK].
General Settings
Recording Video Standard
Auto Chapter Auto
Auto Finalise PAL
Make Rec. Compatible SECAM
Recording Language
External Input Audio
Video Standard
Auto : The Video Standard will be set
automatically according to the
recording material.
PAL : The Video Standard will be set to PAL.
SECAM : The Video Standard will be set to
SECAM.
5
Press [HOME] to exit.
Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
Recording from External Equipment
HDD HDD D D VD+R DVD+RW VD+RW W DVD+R D D VD+R VD+R
D D VD-R DVD-R VD-R
Before recording from external equipment, see page
19 for connection instructions.
1
Turn on the TV and the unit, and
select the input of the TV to which
the unit is connected.
If you are recording to the HDD, press [HDD].
If you are recording to a disc, press [DVD] and
insert a recordable disc.
DVD-RW D D VD- VD-R R W W