Automatic Recording From Satellite Receiver - Philips DVDR3575H User Manual

Automatic recording from
Satellite Receiver
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2-TO VCR/
SAT scart socket of this recorder. In
addition, the Satellite Receiver must have
a timer function that is able to control
the recording function of this recorder.
Before you start ...
Ensure that the { SAT record } mode in
the recording setting is set to { On }.
A
Use the Satellite Receiver's timer
programming function to program the
recording (refer to the Satellite
Receiver's user manual).
Each recording can be programmed up
to 6 (six) hours.
B
Turn off the Satellite Receiver to standby
mode.
C
Turn off the recorder to standby mode.
Leave the recorder and Satellite
Receiver in standby mode for the
recording.
The recorder starts recording when it
detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder's timer recordings take
priority over automatic satellite recording.
Automatic Satellite recording stops if the
recorder's timer recording is due to start.
Downloaded From Disc-Player.com Philips Manuals
Record TV Programme
(continued)
37