Advertisement
SMS Syntax: PASSWORD COMMAND (example: 00 ON to switch
on the auxiliary heating system where the password is "00")
My Thermo Call TC2 telephone number:
ACTIVATE auxiliary heating
DE-ACTIVATE auxiliary heating
ACTIVATE auxiliary heating system for xxx minutes
PROGRAMMING operating time
Change PASSWORD
Activate SMS RESPONSE
De-activate SMS RESPONSE
Status check
Operation via push-button Switch
A push-button is included in the delivery. This must be installed if you have no preset timer
or Telestart and is used to activate and display the current operating mode of your
auxiliary heating.
Pressing the button repeats the last control function. If the system is activated by pressing
the button, the current heating or ventilation cycle ends.
LED steady light
LED blinks fast
Function
→ Auxiliary heating active
→ Immediately after button is pressed
Command
Press Key No.
ON
OFF
ON (Number of
minutes)
TIME (Number of
minutes)
PWD .....
SMS ON
SMS OFF
CHECK
Note
1
2
3
4
5
6
6
7
Advertisement
