Xplore XSLATE R12 User Manual page 27

An application might have stopped responding. Use the Task Manager to manually stop the
application.
1. Press the Security button on the left side of the tablet frame.
2. Select Task Manager.
3. Select the application that isn't responding.
4. Tap End task.
Shutting down the tablet
You can also press and hold the power button for five seconds to force the tablet to shut down.
However, this isn't recommended. Use it as a last resort.
If the tablet does not shut down after holding the power switch for five seconds, follow this procedure.
1. Unplug the power adapter.
2. Remove the battery.
3. Press the Volume, Power, and Security buttons simultaneously.
4. Replace the battery and restart the Tablet PC.
The Tablet will not enter Hibernate mode.
Hibernate mode might not be enabled. Enable hibernation by adjusting the power button behavior
from the Xplore Dashboard.
The Tablet does not return from Hibernate mode while on battery power.
The battery might be depleted. Plug the Tablet PCs power adapter into an AC outlet and into the
Tablet PC.
The power button is blinking but nothing is happening.
The tablet is in Sleep mode. Press the Power button to wake up the tablet.

To power off the tablet completely, you can press and hold the power button for about five
seconds. However, this isn't recommended.
The display goes black while the Tablet PC is still turned on.
The possibilities include:

The tablet might have turned off the display to save power. To restore the display, tap the
screen with your finger or the pen.

The tablet might have gone into Sleep mode. Press and hold the Power button for about one
second.

The tablet might have gone into low-battery Hibernation mode. In Hibernation mode, the
power status light is off. Plug the tablet in to AC power, then press and hold the power button
for about one second.
26