Barcode Scanner; Using The Barcode Scanner; Using The Rfid Reader - Xplore XSLATE R12 User Manual

Barcode Scanner

The R12 barcode scanner supports several different types of barcodes.
The following barcode symbologies are enabled by default:
The EasySet software is loaded on the system if you purchased the barcode scanner.

Using the Barcode Scanner

1. In the tablet, open the application software that is going to receive the barcode data and put
the insertion point in the appropriate field of that software.
2. Aim the scanner lens at the barcode.
3. Press and release Function button 3. Ensure that the scan beam covers the entire barcode. (The
best scans are typically from six to seven inches from the barcode.)
If the scan is successful, the data appears in the application and you hear the confirmation
beep.

Using the RFID Reader

1. Open the Xplore RFID Demo (MCRIFD.exe) utility or the RFID scanning application installed by
you system administrator.
2. Hold the RFID tag and ensure that the tag is 1-1.5 inches (25-40mm) from the RFID antenna
scan area.
3. If you are using the Xplore RFID Demo utility, tap Refresh UID and Tag Data. If you are using
another application, please use according to the documentation.
Aztec
Code 128
GS1-128
Code 39
Interleaved 2 of 5
Micro PDF417
22
UPC-A
UPC-E
EAN-8
EAN-13
PDF417
QR Code