Ferroli MERCURY 2 Installation And Operation Manual page 38

Positioning of suspension bars
Lift the machine using a suitable lifting device (hoist, forklift or other) appropriate, that can support the weight
of the machine. Pass the threaded rods into the holes and secure them with fixing nut, washer and nut M8
(not supplied).
We recommend using a suitable system for not transferring to the structure some possible vibration
(vibration damping rubber or other material).
Ceiling fixing bars
Check that the machine is perfectly horizontal or sloping slightly towards the condensate drain (never
counter slope). If necessary adjust the height by means of the nut and locking nuts that hold the threaded
rod to the bracket.
Unit positioning
Depending on type of ceiling and installation location, you can use other procedures, provided they comply
with the current standards and with attention for the safety of people
.
INSTALLATIONS
15
Antivibrating
Washer
Nut
Locknut