Page 1
TOP FAN Plus rem Fan coil INSTALLATION MANUAL...
Page 2
Dear Customer, Thank you for having purchased a FERROLI fan coil. It is the result of many years experience, particular research and has been made with top quality materials and higlly advanced technologies.The CE mark guaranteed thats the appliances meets European Machine Directive requirements regarding safety.
DECLARATION OF CONFORMITY The company hereby declares that the machine in question complies with the matters prescribed by the following Directives: • Machinery directive 2006/42/EC • Electromagnetic compatibility directive (EMC) 2004/108/EC • Low voltage directive (LVD) 2006/95/EC The manufacturer is associated with the EUROVENT certification program. The products are listed in the certified products guide www.eurovent-certification.com GENERAL WARRANTY CONDITIONS The manufacturer guarantees the appliances sold.
DESCRIPTION OF THE APPLIANCE PURPOSE OF THE MACHINE The convector fan is an appliance that treats the air in the room in both summer (bank supplied with cold water min. 6°C) and winter (bank supplied with hot water max 85°C). AVAILABLE VERSIONS AND INSTALLATION METHODS The range of centrifugal convector fans includes three versions.
Page 6
DESCRIPTION OF THE APPLIANCE 2: VM-F - Convector fan with cabinet and frontal intake Consisting of a sheet metal cabinet, a delivery grille with doors to access a panel if installed in thermoplastic material, plus an air filter that can be regenerated installed in the front grille, made of plastic material and sheet metal and closing at the bottom.
Page 7
DESCRIPTION OF THE APPLIANCE 3: VN - Convector fan without cabinet for built-in installation Without cabinet. Includes a filter which can be regenerated, mounted on a metal frame with covering profile in plastic material. It can be fitted with a series of accessories to suit the installation requirements (e.g. plenum, flanges, unions).
DIMENSIONAL DATA OVERALL DIMENSIONS OF MODEL THAT INTAKES FROM BELOW MODEL A (mm) 1190 1190 1190 1440 1440 Weight (kg) OVERALL DIMENSIONS OF MODEL THAT INTAKES FROM THE FRONT MODEL A (mm) 1190 1190 1190 1440 1440 Weight (kg)
DIMENSIONAL DATA OVERALL DIMENSIONS OF DUCTED MODEL MODEL A (mm) 1224 1224 Weight (kg) OVERALL DIMENSIONS OF BRACKETING 137.5 137.5 Ø 16 Overall dimensions Dimensioni di ingombro if applicable involucro qualora presente MODEL A (mm) 1165 1165...
INSTALLATION PACKING AND CONTENTS The convector fans are shipped in standard packaging consisting of a cardboard box inside which angular pieces of polystyrene are fitted to protect the appliance from damage during the handling phase. The cardboard box contains: • No. 1 convector fan •...
INSTALLATION RECOMMENDATIONS FOR CORRECT INSTALLATION • Horizontal installation: Fig.1 Fig.1 - The appliance must slant at least 2° to allow the condensation to flow away. See Fig.1. Fig.1 Fig.1 - The appliance must slant slightly towards the downflow side to prevent water from stagnating in the tray. See Fig.2. Fig.2 Fig.2 Fig.2...
INSTALLATION OPERATIONS PRIOR TO INSTALLATION Comply with the following instructions before beginning to install the appliance: - Make sure that all parts of the convector fan are in a perfect condition. - Make sure that the appliance has not sustained damage during transport. Immediately notify the haulage contractor if damage is discovered.
INSTALLATION ACCESSORY PARTS NORMALLY AVAILABLE ON THE MARKET AND REQUIRED FOR INSTALLATION The following items are also required: - Plumbing unions - Anti-condensation tape - Adhesive tape - Copper pipe of flexible steel pipe with built-in unions - Ø 8mm press-in plugs HOW TO INSTALL THE APPLIANCE The position chosen for the installation must allow the convector fan to be easily serviced.
ELECTRICAL CONNECTIONS GENERALITA’ IMPORTANT: • Disconnect the power supply before start with the wiring connection. • Disconnect the power to all circuits before accessing the electrical parts. • Before connecting the power cable, identify line L and neutral N, then make the connections according to the wiring diagram .
ELECTRICAL CONNECTIONS MOTOR WIRING - VERSION VN Series VN convector fans have a six-speed motor. The most appropriate connection can be selected to suit the working head. The appliances leave the production line with the electrical connections shown in the figure below. Mod .
ELECTRICAL CONNECTIONS WIRING DIAGRAMS SCHEDA DI CONTROLLO CONTROL BOARD Panel RICEVITOR RICEVITORE T1 T1 T2 T2 T3 T3 AUX1 COMP Room Water Temp Temp L N C V1 V2 V3 Sensor Sensor...
ELECTRICAL CONNECTIONS RECEIVER INSTALLATION VM-B, VM-F Series In these units the receiver is located directly on the case, and does not require installation. Just make sure to correctly release and refit the connection cable between the receiver and the electronic board when installing the unit and for any work requiring removal of the case.
ELECTRICAL CONNECTIONS CONFIGURATION UNIT At the time installation the electronic board can be configured according to the type of system used, by means of the jumpers (Fig.1) on the board. In the table also shows the standard configuration pre-engineered in the factory. ATTENTION: the command must not be powered during the configuration operations .