Chain Oil; Mounting The Pruner; Saw Chain - Westfalia 2 in 1 Garden Set 18 V Instruction Manual

Chain Oil

 The pruner is delivered without chain oil. Before using the pruner for the first
time, fill suitable chain oil into the oil tank. Operating the pruner without chain
oil will damage the machine.
 Open the oil tank cap. Only use bio-degradable chain saw oil. Observe the
MIN marking on the oil tank. The oil tank has to be filled at least up to the MIN
marking but not more than the MAX marking. While filling, make sure dirt
cannot get into the oil tank. Dirt can damage the built-in oil pump.

Mounting the Pruner

1. For locking the pruner attach-
ment with the motor unit, attach
the pruner into the opening of
the motor unit and turn both
components until they lock in
place.
2. For removing the pruner attach-
ment from the motor unit, first
press the releasing button (18)
and turn the attachment slightly
counter clockwise to remove it.

Saw Chain

 Only use sharp chains. Dull chains easily can get jammed.
 While working with new chains, regularly check the chain tension because new
chains can lengthen considerably upon initial operation.
 The service life of a saw chain mainly depends on sufficient lubrication and
correct tensioning.
 Do not tension a hot chain. After cooling down, the chain may shorten and
therefore becomes over tensioned.
Pruner
39