Radio Shack 43-164 Manual page 52

Beyond.the.Basics
2.
3.
4.
5.
NOTES
UC050ZH_43-164_OM3.indd 52
You hear "To play incoming message, press 2. For help,
press 0." You hear intermittent beeps.
Enter a command within 15 seconds. you may select a
command from the following chart:
Command
/1
/2
/3
/4
/5
6
9
0
After the command has finished, you hear intermittent beeps
indicating that the system is in the command waiting mode.
You may enter another command at this time from the chart
on step 3.
when you are finished, press end to exit the system. The
answering system automatically returns to standby.
• If you press end before the base is connected, the
phone will return to standby.
• If the base is not connected within five seconds,
you hear beeps and the phone will return to
standby.
• The base's keypad is disabled during remote
operation.
• If you receive a call, the remote operation is
canceled.
• During the remote operation [ ] appears on the
base.
• If you have new messages and old messages, only
the new messages will be played. After you have
reviewed your new messages, you can play your
old messages by pressing
Function
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Answering System Off
Voice Prompts

/2 again.
1/9/2007 3:46:01 PM