Radio Shack 43-164 Manual page 45

Beyond.the.Basics
1.
2.
3.
Temporarily.Mute.the.Base.Ringer.and.the.Call.Screen
When the phone is ringing, press
mute the incoming ring. This also mutes the caller's message
being recorded (Call Screen). The ringer and the Call Screen will
be heard with the next incoming call.
The base ringer mute is canceled when pressing ringer.
The Call Screen mute is canceled when pressing volume/select/
or volume/select/
Adjusting.the.Speaker.Volume.Level
You can adjust the volume of the base speaker by pressing the
volume/select/
volume/select/
base speaker is being used except for menu mode. The base
speaker volume also applies the Call Screen.
The numbers [ ]-[ ] are displayed on the base indicating the
volume levels. [ ] being the softest (being off for the Call Screen)
and [ ] being the loudest.
UC050ZH_43-164_OM3.indd 45
Press ringer.
You hear the ringer at the current volume level ([
[ ] Low, [ ] Off) (if you set the base ringer volume to
off, "Ringer off" is announced in standby mode.) and it is
displayed on the base.
Press ringer repeatedly until the desired ringer option
appears.
The message counter displays new ringer volume.
or volume/select/
or volume/select/
(play/stop) to temporarily
.
on the base. Press
for softer during the

] High,
1/9/2007 3:45:58 PM