Radio Shack 43-164 Manual page 39

Beyond.the.Basics
Setting.the.Time
The clock on the answering system starts when power is
supplied to the base. Follow these steps to set the clock to the
correct time.
NOTES
1.
2.
3.
4.
5.
6.
7.
8.
9.
UC050ZH_43-164_OM3.indd 39
• Normally the idle time for the menu mode is ten
seconds before the system returns to standby.
However for setting the time, the idle time is
extended to two minutes.
• Press and hold volume/select/
select/
on the display.
Press menu/clock.
The system announces "Time", the current time and the
guidance for setting the time.
Press volume/select/
correct day is announced. The numbers [ ] through [ ] are
displayed on the base.
Press set to select the day.
Press volume/select/
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
Press set to select the hour.
Press volume/select/
the correct minute setting. The numbers [
are displayed on the base.
Press set to select the minute.
Press volume/select/
the correct AM or PM setting. The message counter displays
[ ] or [ ].
Press set to select the AM/PM setting.
to quickly scroll through the numbers
or volume/select/
or volume/select/
or volume/select/
or volume/select/

or volume/
until the
until you hear
until you hear
] through [ ]
until you hear
1/9/2007 3:45:54 PM