Radio Shack 43-164 Manual page 51

Beyond.the.Basics
NOTE
4.
5.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can
turn it on remotely from any touch-tone telephone.
1.
2.
3.
4.
5.
Remote access with the handset
You can operate your answering system from another room
using a handset.
1.
UC050ZH_43-164_OM3.indd 51
After you enter the remote access menu, you
must enter a command within 15 seconds, or the
answering system automatically hangs up and
returns to standby.
After all of the Voice Prompts have played, you hear
intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command
at this time from the chart.
when you are finished, hang up to exit the system. The
answering system automatically returns to standby.
Call your telephone number.
Wait ten rings until the system answers. You hear intermittent
beeps.
Press 0. And then enter your PIN code. The answering
system announces the current time and the number of
messages stored in memory. You hear "To play incoming
message, press 02. For help, press 10".
Press 0. And then 6 to turn the answering system On. You
hear the outgoing message and a confirmation tone.
Hang up the phone and subsequent calls will be answered by
the system.
With the phone in standby mode, press select/remote on the
handset. "Remote AnsweringMachine operation" appears on
the display. The answering system announces the current
time and the number of messages stored in the memory.
1
1/9/2007 3:45:59 PM