System - D-Link DCS-935L User Manual

Section 4 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local
Click Save Configuration to save the current camera configuration to your local
Hard Drive: PC.
Load From Local To load a previously saved configuration, click Browse..., select your saved
Hard Drive:
configuration file, then click Restore Configuration From File.
Restore To Click Restore Factory Default to reset all settings back to the factory default
Factory Default:
settings. Please note that this will erase any changes you have made to the
settings of the camera.
Reboot The Click Reboot the Device to reboot the camera.
Device:
Schedule Reboot:
Check the box to schedule the camera to reboot according to a specified
schedule. Select the day(s) and time you want the camera to automatically
reboot, and click Save.
D-Link DCS-935L User Manual

System

45