Internet Connection Setup Wizard - D-Link DCS-935L User Manual

Section 4 - Configuration
The Internet Connection Setup Wizard will guide you through a step-by-step process to
configure your DCS-935L and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use.
• DHCP Connection: This option should be selected if you have a DHCP server running
on your network and would like a dynamic IP address to be assigned to your camera
automatically.
• Static IP Address: This option allows you to manually assign the network settings for
your camera. Click the radio button and enter the following details:
IP Address: Enter the IP address that the camera will use on your network. You can get this
information from your Internet Service Provider (ISP) or network administrator.
Subnet Mask:
The default value is 255.255.255.0. This value is used to determine if the
destination is part of the same network segment.
Default Gateway:
This value is the gateway used to forward data to destinations in a different
subnet. Invalid gateway settings may cause the failure of transmissions to a
different subnet.
Primary DNS:
Primary domain name server that translates names to IP addresses.
Secondary DNS: Secondary domain name server to backup the Primary DNS.
• PPPoE: If your camera is connected to the Internet through a DSL modem, you may check
the box by PPPoE.
(Most DSL providers use PPPoE.)
by your ISP for your PPPoE account.
Click Next to continue.
D-Link DCS-935L User Manual

Internet Connection Setup Wizard

Enter the User ID and Password provided
28