Configuration; Accessing The Web Configuration Utility - D-Link DCS-935L User Manual

Section 4 - Configuration

Configuration

Accessing the Web Configuration Utility

After setting up your DCS-935L with either the mydlink Lite app or Zero Configuration Setup, you are ready to use your camera. The camera's built-in
Web configuration utility is designed to allow you to easily access and configure your DCS-935L.
Use a Web browser to go to the www.mydlink.com website, and sign in to your mydlink
account. Select your camera, click on the Settings tab, then click on Advanced Settings to
access your camera's Web configuration utility.
Enter the User name admin and the Password you created when setting up your camera. (If
you did not create a password, the default password is blank.) After entering your password,
click OK.
Note: If you are directly connecting your PC to the camera, the default IP address is 10.255.255.1.
If the camera is connected to a router or network, a different IP address may have been assigned.
D-Link DCS-935L User Manual 24