Section 4 - Configuration
This wizard will guide you through a step-by-step process to
configure your new D-Link Camera and connect the camera to the
Internet.
Note: This wizard will not register your camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server (usually
enabled on your router) to assign the camera its IP settings. If you
want to manually assign the IP settings, select Static IP Address
and enter the following details:
IP Address:
Enter an IP address for your camera.
Subnet Mask:
Enter the subnet mask of your network.
Default Gateway:
Enter the default gateway address. This is usually the
IP address of your router.
Primary DNS:
Enter the primary DNS server's IP address. This is
usually the IP address of your router.
Secondary DNS:
Enter the secondary DNS server's IP address. This is
optional.
Click Next to continue.
D-Link DCS-5222L User Manual
Internet Connection Setup Wizard
22