Internet Connection Setup Wizard - D-Link DCS-960L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the Internet.
Click Next to continue.
Select how the camera will connect to the Internet.
If your router is connected to a router, or you are unsure how your camera will
connect to the Internet, select DHCP Connection.
If your ISP has assigned you a static IP, select Static IP Address and enter the following
details:
IP Address: Enter the IP address that the camera will use on your network. You may need to
get this information from your ISP or network administrator.
Subnet Mask:
The default value is "255.255.255.0. " Used to determine if the destination is part
of the same network segment.
Default Gateway:
The gateway used to forward data to destinations in a different subnet. Invalid
gateway settings may cause the failure of transmissions to a different subnet.
Primary DNS: Primary domain name server that translates names to IP addresses.
Secondary DNS:
Secondary domain name server to backup the Primary DNS.
If you are required to connect using PPPoE, select PPPoE and enter the User ID and Password
for your PPPoE connection.
Click Next to continue.
D-Link DCS-960L User Manual

Internet Connection Setup Wizard

23