Table of Contents
Advertisement
Wireless Communication Integration
The ClearChart 4P has the ability to work with two types of RF transmitters with the following specifi-
cations and characteristic:
Configuration
Protocol
Frequency Band
Modulation Method
Channel Access Protocol
RF Output Power
Configuration
Protocol
Frequency Band
Modulation Method
Channel Access Protocol
RF Output Power
Care must be taken when using other equipment operating under the same frequency band above or
any other RF band. The ClearChart 4P may affect or be affected by other equipment while operating
in wireless mode. Therefore, if the ClearChart 4P affects or is affected by other equipment, proper
separation may be required by relocating or re-orienting the equipment.
Generates non-ionizing radiation.
May be affected by non-ionizing radiation.
13785-101 Rev. F
USB Module
Bluetooth
2.4 - 2.4835 GHz ISM Band
GFSK for 1Mbps, ╥ /4-DQPSK for 2Mpbs, 8-DPSK (EDR Mode)
FHSS (Frequency Hopping Spread Spectrum)
Class 1 (+8 dBm typical) up to +20dBm
RS-232 Module
Bluetooth
2.4020 - 2.4800 GHz
GFSK (Basic Mode), ╥ /4-DQPSK, 8-DPSK (EDR Mode)
FHSS (Frequency Hopping Spread Spectrum)
Class 1 (+18 dBm typical) up to +20dBm
49
Advertisement
Table of Contents
