Table of Contents
Advertisement
Chapter 4
4.3
Fig. 4
Protection
window
Installation instructions
o Before installation, check the protection window for dirt, scratches or cracks.
-
-
o Screw the protection window and mount into the beam output on the deflection unit until it
is positioned securely.
14
RAYLASE 3-Axis Subsystem AS-50 for Laser Beam Deflection
For subsystems fitted with a protection window only
Protection window
1 Mount
2 Protection window
3 Clamp ring
If the protection window is dirty, it must be cleaned ( page 23, Instructions for
cleaning protection windows).
If the protection window is scratched or cracked, it must be replaced.
Functional description
MN049 / v1.0.0
Advertisement
Table of Contents
