Table of Contents
Advertisement
Chapter 5
5.2.2
The following steps are used to check that the laser beam is coaxial to the linear translator. If
this is not the case, the input point and, if necessary, the input angle of the laser beam must
be adjusted as described below.
Fig. 6
Checking the
beam coupling
18
RAYLASE 3-Axis Subsystem AS-50 for Laser Beam Deflection
Checking procedure
Warning:
The laser beam can cause severe injury to the eyes and the skin. Make sure
that all personnel in the laser area are wearing appropriate protective goggles
and, if necessary, protective clothing.
Installation
MN049 / v1.0.0
Advertisement
Table of Contents
