Basic Safety Instructions; Laser Safety; Laser Shutter; Signs - RAYLASE AXIALSCAN-50 Manual

Chapter ‎ 1
1
1.1
The user is responsible for safe operation and for safeguarding the surrounding area against
hazards that can be caused by laser radiation. OEM customers must ensure compliance with
all local and national regulations.
1.2
The subsystem is designed to focus and deflect an input laser beam and output it again.
The subsystem cannot block or weaken the laser beam. To prevent unwanted emission of
the laser beam, above a particular danger class the laser device must be fitted with a shutter
( page 5, Classification of laser devices).
The laser device must be of sufficient quality that the laser beam can only be emitted at the
beam output on the subsystem.
1.3
The following signs must be attached to the subsystem. These signs may not be removed.
Signs that have become illegible must be replaced.
4 RAYLASE 3-Axis Subsystem AS-50 for Laser Beam Deflection

BASIC SAFETY INSTRUCTIONS

Laser safety

Laser shutter

Signs

The rating plates and the identification codes printed on them
can be used to determine the type of the subsystem
( page 11, Rating plate code). The serial number and the
item number are also used to identify the subsystem.
The ground symbol identifies the ground connection on the
subsystem. This connection can be connected to the laser
housing via a plug connection to increase the interference re-
sistance.
The CE symbol confirms the subsystem's compliance with
European directives. It indicates that the subsystem is ap-
proved for free trade within the EU.
The seal labels warn against unauthorized opening of the
subsystem. If a seal is broken, all warranty claims against
RAYLASE are void.
A laser warning sign must be attached at the point where
laser radiation is emitted. This provides information about the
type of radiation, specific hazards and the degree of protection.
The laser warning sign is attached by the OEM customer in
accordance with the laser device's classification ( page 5,
Classification of laser devices).
Basic safety instructions
MN049 / v1.0.0