CONDTROL Vector 100 User Manual page 8

LASER DISTANCE METER
EN
Wall surface
Short press Enter menu of functions.
Short press / Select function "Wall surface"
Symbol
Short press
Laser beam is on.
Short press Make the first measurement (height).
Short press Make the second measurement (length 1).
Short press Make the third measurement (length 2).
- height
- length 1
- length 2
- wall surface
3rd, 4th, 5th etc. measurements can be done unlimited number of times. Each
new wall surface is added to previously calculated wall surface result.
Short press Exit the mode.
14
Vector 100 CONDTROL
User manual
will appear on the display.
LASER DISTANCE METER
EN
Volume
Short press Enter menu of functions.
Short press / Select function "Volume"
Symbol
Short press
Laser beam is on.
Short press Make the first measurement (length).
Short press Make the second measurement (width).
Short press Make the third measurement (height).
-length
-width
- height
-volume
Short press Exit the mode.
Vector 100 CONDTROL
User manual
will appear on the display.
15