Advertisement
Operating Your
Height-Adjustable Table
(except for Hop
Single-Stage Table)
®
NOTE: Avoid risk of injury with your height-
adjustable table through proper training. For safe
operation, ensure that there is at least 1" between
the height-adjustable worksurface and any adjacent
objects such as storage or fixed worksurfaces.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Haworth Hop Single-Stage
Summary of Contents for Haworth Hop Single-Stage
- Page 1 Operating Your Height-Adjustable Table (except for Hop Single-Stage Table) ® NOTE: Avoid risk of injury with your height- adjustable table through proper training. For safe operation, ensure that there is at least 1" between the height-adjustable worksurface and any adjacent objects such as storage or fixed worksurfaces.
- Page 2 Switch Type Your table is equipped with one of two switch types (programmable or standard up/down).* Use the up and down arrows and follow the instructions regardless of switch type. PROGRAMMABLE STANDARD UP/DOWN *Switch and table examples are for illustration purposes only—yours may look different depending on table type.
- Page 3 Default Reset Synchronizes motors by returning the table to lowest position. Resetting resolves most mechanism issues. Perform this step once a month, when legs are uneven or not raising. 1. Press the down arrow on switch. 2. Bring table all the way down. 3.
- Page 4 Set or Clear Lower Storage Stop Prevents table from colliding with lower storage components. To set, table needs to be in the lower half of its adjustment range. 1. Lower the table to the desired height. 29" 29” 2. Press and hold both up and down arrows simultaneously until you hear two clicks (about 10 seconds).
- Page 5 Set or Clear Upper Storage Stop Prevents table from colliding with upper storage components. To set, table needs to be in the upper half of its adjustment range. 1. Raise the table to the desired height. 42" 42” 2. Press and hold both up and down arrows simultaneously until you hear two clicks (about 10 seconds).
- Page 6 Program the Preset Heights Saving a height position with the programmable switch 1. Position the top to the desired height. 2. Press the Set (S) button. 3. Within 5 seconds press the desired number key until a double click is heard. NOTE: The readout will show, for example, S (number) until the double click is heard and then the height readout will return.
- Page 7 2. Use the up and down arrow keys until the readout shows S 5. 3. Press the S button to complete. 4. Use the same procedure to switch back to inches. For more information on height-adjustable tables, please visit haworth.com/height-adjustable. SAVE FOR FUTURE REFERENCE...
Need help?
Do you have a question about the Hop Single-Stage and is the answer not in the manual?
Questions and answers