Download Print this page

Haworth Planes Instructions Manual

Height adjustable single sided bench

Advertisement

Quick Links

This product is conformed to UL962 & UL1286 certified to CAN/CSA C22.2 No. 68 & No. 203.
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this table.
DANGER
- To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING
- TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1.
Unplug from outlet before putting on or taking off parts.
2.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3.
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recom-
mended by the manufacturer.
4.
Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
5.
Keep the cord away from heated surfaces.
6.
Do not use outdoors.
7.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8.
To disconnect, turn all controls to the off position, then remove plug from outlet.
WARNING
9.
OUTLET ONLY. SEE GROUNDING INSTRUCTIONS.
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER
- Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A
(see Figure 1). Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Electrical Rating: 120V, 60Hz, 12A
Max Static Load: 175 lbs
CUSTOMER SERVICE PHONE: 1-800-426-8562
IMPORTANT SAFETY INSTRUCTIONS
For use with Planes Height Adjustable Single Sided Bench
For Commercial Use Only
: RISK OF ELECTRIC SHOCK - CONNECT THIS FURNISHING TO A PROPERLY GROUNDED
SAVE THESE INSTRUCTIONS
GROUNDED
PIN
E.C.O. No:
245-520
GROUNDED
OUTLET
1 of 9
Page:
GROUNDED
OUTLET BOX
6100-0072
Part No:
Rev:
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the Planes and is the answer not in the manual?

Questions and answers

Summary of Contents for Haworth Planes

  • Page 1 IMPORTANT SAFETY INSTRUCTIONS For use with Planes Height Adjustable Single Sided Bench For Commercial Use Only This product is conformed to UL962 & UL1286 certified to CAN/CSA C22.2 No. 68 & No. 203. When using an electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using this table.
  • Page 2 PLANES ® Height Adjustable Single Sided Bench Installation Instructions Scale 1 : 1 Tools Required 3/8” Rachet 1/2” Socket Extension 2.5mm 5mm & 6mm FOR ELECTRIC & CRANK TABLES FOR ELECTRIC TABLES Control Module Standard Switch S147 Programmable Switch S147...
  • Page 3 COLOR CODED PARTS CHART Color Column Crank Electric Control Code Label Module Crank Column - 24" Deep Top Crank Column - 30" Deep Top Electric Single Stage - Standard Touch Pad Actuator BLACK Electric Single Stage - Programmable Touch Pad Actuator BLACK Electric Dual Stage High - Programmable Touch Pad Actuator VIOLET...
  • Page 4 FOR ELECTRIC & CRANK TABLES (S147) (S122) ELECTRIC COLUMN M6 X 12mm Button Head S147 8 mm Hex Nut S147 S122 S147 S147 CRANK COLUMN S147 S147 S120 (S147) M6 X 12mm Button Head (S120) #10 x 3/8" Screw CUSTOMER SERVICE PHONE: 1-800-426-8562 E.C.O.
  • Page 5 FOR POWER (S124) Ordered Separately #10-24 x 3/8" Hex as power retrofit kit Flange Head Screw A) All interconnected electrical systems shall terminate with (S147) an office furnishings electrical S124 system. M6 X 12mm Button Head B) All interconnected electrical systems shall not have an interconnection such that an office furnishings system is...
  • Page 6 (S147) M6 X 12mm Button Head S147 (S120) #10 x 3/8" Screw S120 CUSTOMER SERVICE PHONE: 1-800-426-8562 E.C.O. No: 245-520 Rev: Page: 6 of 9 6100-0072 Part No:...
  • Page 7 (S-1) #10 x 1" Pan Head Screw FOR CRANK TABLES (S-1) #10 x 1" Pan Head Screw CUSTOMER SERVICE PHONE: 1-800-426-8562 E.C.O. No: Rev: 245-520 Page: 7 of 9 6100-0072 Part No:...
  • Page 8 FOR ELECTRIC TABLES (S-1) #10 x 1" Pan Head Screw CUSTOMER SERVICE PHONE: 1-800-426-8562 E.C.O. No: 8 of 9 Rev: 245-520 Page: 6100-0072 Part No:...
  • Page 9 FOR ELECTRIC TABLES Initial Calibration After assembly all electric tables must be calibrated to insure smooth and trouble free movement. Lower the table to the lowest height by pressing the down arrow on the switch. Continue to press the down arrow for 5 to 10 seconds. NOTE: The table will readjust itself if needed.